Nov 28-Dec 02
Return within 14 days of purchase.
In Stock
OB02016K
Osburn
The new standard lowering the fine particulate emission threshold will be conquered by the recent certification of the Osburn 2000 wood-burning stove. This revamped version now offers an incredibly low average particulate emissions rate of only 1.54 g/h, maximum heat output of 75,000 BTU/h, and 77% optimum efficiency. This insert still has a 2.4 ft3 combustion chamber and a 144-CFM variable-speed fan that is strategically positioned to redistribute heat throughout the room.
Designed to receive an optional faceplate that can cover a masonry hearth up to 32 inches (81 cm) high and 50 inches (127 cm) wide. A steel door overlay is available in black or brushed nickel as well as faceplate trims. Look no further, treat yourself to Osburn's legendary quality!
If your installlation requires the use the optional 32" x 50 Cuttable Faceplate (18 GA) only Overlay is Required
NOTE: Shown with required faceplate, faceplate trim, and door overlay (not included). The faceplate, faceplate trim, and door overlay must be purchased to complete this unit.
Required Accessories:
Also Available with Forever Flex Liner Kit Osburn 2000 Wood Insert OB02016
Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time, and maximum heat output.
Recommended heating area and maximum burn time may vary subject to location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
Performances are based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
This appliance is officially tested and certified by an independent agency.
Carbon monoxide.
Is this a right-sized unit for your wood insert? Talk to an Expert at +1-213-319-5566 or email: help@brightesthome.com to ensure that this wood insert is best suited for your needs.
(Data expressed in inches. 1 inch = 25.4 mm)
United States
The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogs, flyers, magazines, and/or websites).
Note: Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
32'' X 50'' Cuttable Faceplate (18 GA) - AC01357
5" Fresh Air Intake Kit - AC01298
5'' Fresh Air Intake Register with Airtight Damper - AC01349
Osburn Rigid Firescreen - AC01315
7 3/16" X 26" Heat Shield for Surround/Shelf - AC01317
"Simply the best! You will not go wrong with this company. Unbeatable prices & the customer service is beyond amazing!! Don’t spend your money anywhere else. Payson and the other staff there literally held my hand the entire way, from purchase to beyond delivery! Didn’t ditch me even after my purchase was delivered. Absolute communication!!! This will be my go to place for all my appliance needs and I’ve let everyone I know, know about Brightest Home and their wonderful team! Many, Many thanks!"
Lupe Gaitan from Fort Worth, TX on June 12, 2023Free Shipping
On all orders
Easy Returns
30-day returns
Authorized Dealer
On all brands
Expert Advice
Call us 24/7
Wishlist is empty.
The new standard lowering the fine particulate emission threshold will be conquered by the recent certification of the Osburn 2000 wood-burning stove. This revamped version now offers an incredibly low average particulate emissions rate of only 1.54 g/h, maximum heat output of 75,000 BTU/h, and 77% optimum efficiency. This insert still has a 2.4 ft3 combustion chamber and a 144-CFM variable-speed fan that is strategically positioned to redistribute heat throughout the room.
Designed to receive an optional faceplate that can cover a masonry hearth up to 32 inches (81 cm) high and 50 inches (127 cm) wide. A steel door overlay is available in black or brushed nickel as well as faceplate trims. Look no further, treat yourself to Osburn's legendary quality!
If your installlation requires the use the optional 32" x 50 Cuttable Faceplate (18 GA) only Overlay is Required
NOTE: Shown with required faceplate, faceplate trim, and door overlay (not included). The faceplate, faceplate trim, and door overlay must be purchased to complete this unit.
Required Accessories:
Also Available with Forever Flex Liner Kit Osburn 2000 Wood Insert OB02016
Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time, and maximum heat output.
Recommended heating area and maximum burn time may vary subject to location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
Performances are based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
This appliance is officially tested and certified by an independent agency.
Carbon monoxide.
Is this a right-sized unit for your wood insert? Talk to an Expert at +1-213-319-5566 or email: help@brightesthome.com to ensure that this wood insert is best suited for your needs.
(Data expressed in inches. 1 inch = 25.4 mm)
United States
The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogs, flyers, magazines, and/or websites).
Note: Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
32'' X 50'' Cuttable Faceplate (18 GA) - AC01357
5" Fresh Air Intake Kit - AC01298
5'' Fresh Air Intake Register with Airtight Damper - AC01349
Osburn Rigid Firescreen - AC01315
7 3/16" X 26" Heat Shield for Surround/Shelf - AC01317
