Nov 28-Dec 02
Return within 14 days of purchase.
In Stock
OP00025
Osburn
The new Osburn 2500 pellet stove is an entry-level appliance, roughly comparable to the 3000 model, whose appearance is more like that of a conventional wood stove. Although slightly different in some respects than its congener, it still retains the same distinctive signs of the brand.
This pellet stove is made from high-quality materials: Canadian steel of a higher grade, glass-ceramic imported from Germany, heat exchangers made of stainless steel, and thermosetting powder paint. Despite these real assets, worthy of a remarkable design, this product is offered at a very competitive price in addition to being eligible for certain credits and programs (government incentives).
Responding largely to the next highest standards of solid fuels and environmental protection, the Osburn 2500 has an incredibly low average particle emission rate below 0.96 g/h.
Thanks to easy installation, intuitive electronic control, and easy-to-use thermostatic control, the Osburn 2500 is for anyone who wants nothing complicated. It is also easy to clean with access to removable components without tools.
Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time, and maximum heat output.
Recommended heating area and maximum burn time may vary subject to location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
Performances are based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
This appliance is officially tested and certified by an independent agency.
Carbon monoxide.
Is this a right-sized unit for your Pellet Stove? Talk to an Expert at +1-213-319-5566 or email: help@brightesthome.com to ensure that this Pellet Stove is best suited for your needs.
(Data expressed in inches. 1 inch = 25.4 mm)
United States
The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogs, flyers, magazines, and/or websites).
Note: Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
2" X 25' Anti-Static Flex Hose - AC01465
3" X 10' Insulated Flex Pipe for Fresh Air Intake - AC02092
3" X 5' Fresh Air Intake Kit - AC01240
Digital Wall Thermostat - AC05558
Hopper Extension - AC01393
Leg Assembly for - AC01463 Discharge Tank - AC01464
Stand Alone Auxiliary Discharge Tank - AC01463
Storage Tank Extension for AC01460 - AC01462
Storage Tank with Pneumatic Self-Feeding Pellet System - AC01460
Tempered Glass Hearth Pad 10 MM - 44" X 36" - AC02704
"Simply the best! You will not go wrong with this company. Unbeatable prices & the customer service is beyond amazing!! Don’t spend your money anywhere else. Payson and the other staff there literally held my hand the entire way, from purchase to beyond delivery! Didn’t ditch me even after my purchase was delivered. Absolute communication!!! This will be my go to place for all my appliance needs and I’ve let everyone I know, know about Brightest Home and their wonderful team! Many, Many thanks!"
Lupe Gaitan from Fort Worth, TX on June 12, 2023Free Shipping
On all orders
Easy Returns
30-day returns
Authorized Dealer
On all brands
Expert Advice
Call us 24/7
Wishlist is empty.
The new Osburn 2500 pellet stove is an entry-level appliance, roughly comparable to the 3000 model, whose appearance is more like that of a conventional wood stove. Although slightly different in some respects than its congener, it still retains the same distinctive signs of the brand.
This pellet stove is made from high-quality materials: Canadian steel of a higher grade, glass-ceramic imported from Germany, heat exchangers made of stainless steel, and thermosetting powder paint. Despite these real assets, worthy of a remarkable design, this product is offered at a very competitive price in addition to being eligible for certain credits and programs (government incentives).
Responding largely to the next highest standards of solid fuels and environmental protection, the Osburn 2500 has an incredibly low average particle emission rate below 0.96 g/h.
Thanks to easy installation, intuitive electronic control, and easy-to-use thermostatic control, the Osburn 2500 is for anyone who wants nothing complicated. It is also easy to clean with access to removable components without tools.
Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time, and maximum heat output.
Recommended heating area and maximum burn time may vary subject to location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
Performances are based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
This appliance is officially tested and certified by an independent agency.
Carbon monoxide.
Is this a right-sized unit for your Pellet Stove? Talk to an Expert at +1-213-319-5566 or email: help@brightesthome.com to ensure that this Pellet Stove is best suited for your needs.
(Data expressed in inches. 1 inch = 25.4 mm)
United States
The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogs, flyers, magazines, and/or websites).
Note: Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
2" X 25' Anti-Static Flex Hose - AC01465
3" X 10' Insulated Flex Pipe for Fresh Air Intake - AC02092
3" X 5' Fresh Air Intake Kit - AC01240
Digital Wall Thermostat - AC05558
Hopper Extension - AC01393
Leg Assembly for - AC01463 Discharge Tank - AC01464
Stand Alone Auxiliary Discharge Tank - AC01463
Storage Tank Extension for AC01460 - AC01462
Storage Tank with Pneumatic Self-Feeding Pellet System - AC01460
Tempered Glass Hearth Pad 10 MM - 44" X 36" - AC02704
